Problem solving in the operation of automatic feeder
Release time:
2024-09-13 00:00
Source:
The solution of the belt conveyor frame colliding with the breast wall of the melting pool space of the electric melting furnace: add a collision power-off device at the head of the conveyor, and during operation, once the contact of this device touches the obstacle, the equipment will be stopped by the trigger switch.
The solution of conveying belt bonded material scattering: learn from the relevant technology of Germany belt conveyor, cancel the lower roller of the conveyor and replace it with a supporting plate. The main requirements for the material of the supporting plate:
(1) A low coefficient of friction is the key to ensuring the life of the conveyor belt
(2) The high temperature resistance is about 200°C, and it should be able to withstand the ambient temperature of working inside the kiln
(3) The material is determined to choose PTFE (polytetrafluoroethylene), the outstanding advantage of this material is that it has a very low dynamic and static friction factor, can be used continuously for a long time at 260 °C, the outstanding surface is not sticky, and almost all viscous materials can not be attached to its surface. The belt return trip directly rubs with the supporting plate and brings the bonded material to the tail receiving groove at the same time, so as to solve the problem of scattering the material on the return trip of the conveyor belt, and collect and process the scattered material in a centralized manner.
The solution to the installation position of the furnace is too large: through accurate calculation during the design, the distance is adjusted to the maximum to the minimum, so as to improve the economy and stability of the equipment.
The baffle plate is made on both sides of the receiving place to make frictional contact with the belt, and the vertical height of the blanking cone hopper and the conveyor belt is specified accordingly to ensure that the material can be stably transported to the inside of the kiln.
Related News
What are the advantages of borosilicate glass and how it differs from ordinary glass
High borosilicate glass is a special glass material with low expansion rate, high temperature resistance, high hardness, high light transmittance and high chemical stability. Due to its excellent performance, it is widely used in solar energy, chemical and pharmaceutical packaging, electric light sources, craft jewelry and other industries. Its good performance has been widely recognized by all walks of life in the world, especially in the field of solar energy, its application is becoming more and more extensive, and developed regions such as Germany and the United States have also been more widely promoted. The high borosilicate glass fire resistance and physical strength make it ideal for laboratories. It is used in the manufacture of high-durability glass in laboratory equipment, such as beakers and test tubes. Glass cookware is another common usage. The U.S. standard plate is almost entirely made of borosilicate glass. High borosilicate glass measuring cups with scales can be used for measurement and are also widely used in American kitchens. High-quality high borosilicate glass tube processing equipment, high transparency and wear resistance. Wear-resistant, smooth surface, easy to clean, healthy and hygienic. It can be used for solar collector tubes, chemical instruments, dayware and lighting glass. It is characterized by a small coefficient of expansion and is not easy to break under sudden temperature changes of 0-200 degrees; Resistant to acid and alkali, water, corrosion, etc.! High borosilicate glass, also known as hard glass, uses the properties of glass to conduct electricity at high temperatures. It is heated inside the glass to melt the glass.
The main cause of stones in the furnace of high borosilicate glass
There will be inclusions such as bubbles, nodules, crystals, and stones in the vitreous. These defects in the vitreous body greatly reduce the quality of the glass. In the case of borosilicate glass, stones are a dangerous defect in the vitreous. They are crystalline solid inclusions that appear in the glass and they have a great influence on the glass. They are more likely to be caused when borosilicate glass fiber precursors are stretched. Brushed guils and flying wires. Even if these stones do not cause breakage, they will greatly reduce the strength of the fiberglass.
Problem solving in the operation of automatic feeder
The solution of the belt conveyor frame colliding with the breast wall of the melting pool space of the electric melting furnace: add a collision power-off device at the head of the conveyor, and during operation, once the contact of this device touches the obstacle, the equipment will be stopped by the trigger switch.
Furnace pool wall air-cooled solution
In many electric furnace designs, the problem of pool wall air cooling is not considered, and only when needed is a fan is temporarily installed to pull a few pipes. In general, it will continue for the entire furnace age. There are two types of pool wall air cooling schemes:
Cosmetic glass manufacturers introduce the advantages of high borosilicate glass
Since the high borosilicate glass contains boron trioxide in its structure, the glass has a low thermal expansion coefficient. At the same time, it will not break at harsh ambient temperatures like ordinary glass. Therefore, many different industries can use it as a good choice to produce products. In addition, what are the main advantages of it? Below and cosmetic glass manufacturers to learn about it!
What are the advantages of choosing high borosilicate glass?
Since the structure of the high borosilicate glass contains diboron trioxide, the thermal expansion coefficient of the glass is low. At the same time, it will not break at high temperatures like ordinary glass.