Cosmetic glass manufacturers introduce the advantages of high borosilicate glass

Since the high borosilicate glass contains boron trioxide in its structure, the glass has a low thermal expansion coefficient. At the same time, it will not break at harsh ambient temperatures like ordinary glass. Therefore, many different industries can use it as a good choice to produce products. In addition, what are the main advantages of it? Below and cosmetic glass manufacturers to learn about it!

29

2024/08

What are the advantages of choosing high borosilicate glass?

Since the structure of the high borosilicate glass contains diboron trioxide, the thermal expansion coefficient of the glass is low. At the same time, it will not break at high temperatures like ordinary glass.

08

2024/08

Main causes of stones in high borosilicate glass electric melting cellar

There will be bubbles, nodules, crystals, stones and other inclusions in the vitreous body. These defects in the glass body greatly reduce the quality of the glass. For borosilicate glass, stones are a dangerous defect in the vitreous body. They are crystalline solid inclusions that appear in the glass body, and they have a great influence on the glass. When borosilicate glass fiber precursors are stretched, they are more likely to cause. Broken ends and flying wires for drawing. Even if these stones do not cause breakage, they will greatly reduce the strength of the glass fiber.

18

2024/07

The difference between low borosilicate glass and high borosilicate glass

Low borosilicate glass and high borosilicate glass are different products, and their chemical compositions are also very different, but these two types of glass belong to the borosilicate glass series, and both have good heat resistance after tempering.

03

2024/07

A customer in Puyang has serious stones

Customer name: A customer in Puyang Problem description: The product has serious stones. Troubleshooting: Check the particle size of raw materials, check the power and discharge volume. Problem solving: The quartz sand in the raw materials is screened and the feeding is stable and uniform. The stable discharge is 21.9T-22T, and the product qualification rate has risen to 80%-86%.

28

2024/06

< 1234...9 >