Delta Automatic Feeder System Upgrade

In order to improve the service life of the feeder belt and its frame, and at the same time improve the uniformity of feeding, the Delta version.The YS type feeder is upgraded and adjusted as follows.

31

2021/08

The voltage/current measured by the electric meter, pointer meter and multimeter are inconsistent.

Phenomenon: During on-site debugging, such situations often occur: the same voltage and current are inconsistent when measured by different instruments, with deviations as small as 20~30 and as many as 60~70. So which is more accurate in measuring electricity meter, pointer meter or multimeter?

29

2021/08

Solutions to Problems in the Operation of Automatic Feeder

The solution of the belt conveyor frame colliding with the breast wall of the melting pool space of the electric melting furnace: add a collision power-off device at the conveyor head. During operation, once the contact of this device contacts an obstacle, the whole equipment will be shut down through a trigger switch.

29

2021/08

What are the advantages of choosing high borosilicate glass?

Since the structure of the high borosilicate glass contains diboron trioxide, the thermal expansion coefficient of the glass is low. At the same time, it will not break at high temperatures like ordinary glass.

20

2020/10

Main causes of stones in high borosilicate glass electric melting cellar

There will be bubbles, nodules, crystals, stones and other inclusions in the vitreous body. These defects in the glass body greatly reduce the quality of the glass. For borosilicate glass, stones are a dangerous defect in the vitreous body. They are crystalline solid inclusions that appear in the glass body, and they have a great influence on the glass. When borosilicate glass fiber precursors are stretched, they are more likely to cause. Broken ends and flying wires for drawing. Even if these stones do not cause breakage, they will greatly reduce the strength of the glass fiber.

14

2020/10

< 1234 >