Problem solving in the operation of automatic feeder
The solution of the belt conveyor frame colliding with the breast wall of the melting pool space of the electric melting furnace: add a collision power-off device at the head of the conveyor, and during operation, once the contact of this device touches the obstacle, the equipment will be stopped by the trigger switch.
13
2024/09
Furnace pool wall air-cooled solution
In many electric furnace designs, the problem of pool wall air cooling is not considered, and only when needed is a fan is temporarily installed to pull a few pipes. In general, it will continue for the entire furnace age. There are two types of pool wall air cooling schemes:
05
2024/09
What are the advantages of choosing high borosilicate glass?
Since the structure of the high borosilicate glass contains diboron trioxide, the thermal expansion coefficient of the glass is low. At the same time, it will not break at high temperatures like ordinary glass.
08
2024/08
Main causes of stones in high borosilicate glass electric melting cellar
There will be bubbles, nodules, crystals, stones and other inclusions in the vitreous body. These defects in the glass body greatly reduce the quality of the glass. For borosilicate glass, stones are a dangerous defect in the vitreous body. They are crystalline solid inclusions that appear in the glass body, and they have a great influence on the glass. When borosilicate glass fiber precursors are stretched, they are more likely to cause. Broken ends and flying wires for drawing. Even if these stones do not cause breakage, they will greatly reduce the strength of the glass fiber.
18
2024/07
The difference between low borosilicate glass and high borosilicate glass
Low borosilicate glass and high borosilicate glass are different products, and their chemical compositions are also very different, but these two types of glass belong to the borosilicate glass series, and both have good heat resistance after tempering.
03
2024/07