Shandong customer's products exploded after grinding with sandpaper
1.1 Customer name: a customer in Shandong 1.1.1 Problem description: The product bursts after sanding with sandpaper. Problem troubleshooting: The inspection found that the product explosion location was at the end of the product, there was a stress meter to detect the product, and the explosion was mesh-like. Problem solving: increase molybdenum ridge in the forehearth, punch and discharge slag at the bottom of the forehearth, and increase the combustion system in the annealing kiln.
14
2024/06
Solutions to Problems in the Operation of Automatic Feeder
The solution of the belt conveyor frame colliding with the breast wall of the melting pool space of the electric melting furnace: add a collision power-off device at the conveyor head. During operation, once the contact of this device contacts an obstacle, the whole equipment will be shut down through a trigger switch.
04
2024/06
What are the benefits of using borosilicate glass?
Because borosilicate glass has a low coefficient of thermal expansion. Therefore, it will not crack at harsh temperatures like ordinary glass. Therefore, many industries regard it as a good choice for producing products. In addition, what advantages does it have? Let Xiaobian briefly introduce to you, let's learn about it! high borosilicate glass
17
2024/05
The advantages of high borosilicate glass compared with ordinary glass
Borosilicate glass is a glass containing boron trioxide and has a very low coefficient of thermal expansion. At the same time, it is the same as ordinary glass and will not break due to temperature changes. This means that you can pour boiling water into a cup made of high borosilicate glass, and you don't have to worry about injury caused by a broken cup when making tea or coffee. So, what's so special about high borosilicate glass? The following is a brief introduction to you, let's learn about it!
13
2024/05
Temperature alarm technology for pool wall tiling
Opal glass electric melting furnace, due to the addition of fluoride in the raw material composition, exacerbated the erosion of AZS bricks on the pool wall. In order to extend the service life of furnace, the outside of the pool wall needs to be tiled in the middle of furnace operation. If tiled too early, forming heat preservation effect on the pool wall, will affect the overall service life of the furnace. Being tiled too late will cause leakage of the pool wall, leading to accidents. Therefore, the timing of the pool wall tiling, directly affects the furnace's utility ratio.
25
2024/04