2025-06-19
At the site of the 6t boron furnace abroad, the after-sales work of bricking hot repair was carried out for the melting pool that has been running for 18 months. During the commissioning of the kiln, the molten brick melting pool was seriously damaged due to the customer's batching error, and the bricking operation faced a very high risk of leakage. To this end, the construction plan is carefully planned before entering the site, and a complete emergency plan is formulated to ensure the safety of on-site personnel and kiln safety.
Learn moreAdvantages and disadvantages of different height powder layers
2025-06-18
1. Advantages and disadvantages of powder layer thickness Taking conventional soda-calcium wine bottle products as an example, under normal circumstances, the height of the powder layer is controlled at 200~300mm, and the production effect is the best. If the height of the powder layer exceeds this range, it is easy to cause uneven material, that is,
Learn moreCharacteristics of the powder layer of the glass electric melting furnace
2025-06-05
The batch layer covered on the surface of the electric melting furnace is called the powder layer, and the height of the powder layer is an important parameter for the design of the glass electric melting furnace. Different from the traditional flame kiln, the electric furnace adopts a vertical melting process, and the powder layer is completely covered on the surface of the molten glass in the melting pool, and at the same time, the heat radiation of the melt to the kiln roof is blocked, so that the temperature of the upper space of the kiln is reduced to below 150 degrees Celsius, commonly known as "cold top". The volatile components in the batch are condensed in the powder layer and flow back into the molten glass, and gases such as carbon dioxide released during the melting process can easily pass through the powder layer and enter the space. The powder layer flows from top to bottom and melts continuously as the temperature rises, gradually completing the clarification and homogenization process.
Learn moreThe 34th International Glass Industry Technology Exhibition was successfully held
2025-05-30
From May 26 to 29, 2025, the 34th China International Glass Industry Technology Exhibition will be held in Beijing China International Exhibition Center (Shunyi Pavilion). With the theme of "Intelligent Manufacturing and Green Future", the exhibition was hosted by the Chinese Ceramic Society and undertaken by Beijing China Silicon Exhibition Co., Ltd., attracting many elites from the global glass industry. HUAFU Technology Development Co., Ltd. performed well in this exhibition, successfully participated in the exhibition and achieved fruitful results.
Learn moreIstanbul Trade Fair Tour: A Journey of Trade and Culture
2025-05-28
From May 12th to May 17th this year, the four of us embarked on a journey to Istanbul, Turkey, and participated in the GLASSMAN Glass Industry Exhibition in Turkey for the first time. As an important transportation hub in the world, Istanbul is like a shining pearl embedded at the junction of the Eurasian continent, connecting the trade and culture of the East and the West.
Learn more2025-05-21
When designing and reinforcing a breast wall structure, it is crucial to consider the installation of lining bricks and the support framework during the design phase to prevent the formation of voids and deformation .
Learn more