The 26th anniversary celebration of Quam Project was successfully held!


The May sun shines on the land, and enthusiasm and vitality are intertwined into a beautiful picture. In this energetic season, Quam Engineering ushered in an important moment in the company's history - ushered in the 26th spring and autumn of the company's establishment. To commemorate this special day, Quam Engineering Co., Ltd. is scheduled to hold a grand celebration event on May 18, aiming to review the brilliant achievements of the past year, look forward to the bright blueprint for the future, and enhance the cohesion and team spirit of employees. The factory celebration activities were rich and colorful, including mountaineering activities and interesting quiz activities, which attracted the active participation of many employees.

 

 

The early morning sun sprinkled the mountains and rivers, and the employees of Huafu Engineering gathered together to embark on a mountaineering journey together. This mountaineering activity is not only an opportunity to get close to nature, but also a journey to challenge yourself. In the process of climbing, employees encourage each other, unite and cooperate, and work together to overcome difficulties such as rugged mountain roads and slippery slopes. As they stand on the top of the hill and look down on the beautiful scenery, they can't help but marvel at their tenacity and perseverance. This mountaineering activity not only exercised the physical fitness of the employees, but also honed their will and enhanced the team cohesion.

 

 

After the mountaineering activity, it was followed by a fun quiz full of wisdom. The purpose of this quiz activity is to stimulate employees' enthusiasm for learning and enhance communication with each other in a relaxed and interesting way. The atmosphere of the event was warm, and the employees actively participated and competed for answers. The questions cover the company's history, culture, technology and other aspects, and aim to examine the level of understanding and mastery of the company by employees.

 

 

This factory celebration is not only a celebration event, but also a spiritual baptism. Through mountaineering activities, employees learned how to persevere and move forward bravely in the face of difficulties. The fun quiz activities allowed them to better understand the company's history and culture, and enhanced their sense of identity and belonging to the company.

In short, the factory celebration ceremony of Huafu Engineering Company came to an end in laughter. This event not only reviewed the company's development process and looked forward to a better future, but also enhanced the cohesion and team spirit of employees. It is believed that in the future, Quam Engineering will continue to uphold the enterprise spirit of "unity, progress, innovation and pragmatism", constantly pursue excellence, and strive to achieve a more brilliant future.

Related News


The Impact of Glass Electrofusion Technology on the Glass Manufacturing Industry

The Impact of Glass Electrofurnace Technology on the Glass Manufacturing Industry In modern industry, the importance of the glass manufacturing sector is self-evident. From household items to high-tech equipment, glass applications are ubiquitous. So, have you ever wondered what enables these glass products to be produced so efficiently? Undoubtedly, the rise of glass electrofurnaces is a key factor. Today, let’s explore the impact of glass electrofurnace technology on the glass manufacturing industry and how it is driving its development. What Is a Glass Electrofurnace? First, let’s take a look at what a glass electrofurnace is. This type of furnace uses electrical energy to heat and melt raw materials into liquid glass. Compared with traditional fuel-based heating methods, glass electrofurnaces not only improve melting efficiency but also reduce energy consumption and environmental pollution. Imagine that conventional combustion is like engaging in a “flame battle,” whereas electrofusion technology accomplishes the same task with “gentle electric current.” Enhancing Production Efficiency The greatest advantage of glass electrofurnaces is their ability to boost production efficiency. Picture preparing a large meal: under traditional methods, you must wait for the fire to reach the right temperature, while using an electrofurnace is akin to having a fast-heating microwave. It can convert raw materials into liquid glass in much less time, thereby accelerating the production cycle. This is particularly beneficial for industries that require large volumes…


An Introduction to the Characteristics and Applications of High-Borosilicate Glass

In modern industry, there are many types of glass, and various glass materials play important roles in different fields thanks to their unique physical and chemical properties. Among them, high-whiteness glass, as a high-quality functional material, deserves special attention for its characteristics and applications. Today, we will discuss the features of high-whiteness glass and its uses in areas such as glass electric melting furnaces. What is high-whiteness glass? High-whiteness glass is a colorless, transparent glass made from high-purity raw materials through meticulous processing. It boasts extremely high transparency, with a light transmittance exceeding 90%, and its low iron content gives it an exceptionally white appearance. Characteristics of high-whiteness glass: 1. High transparency: As mentioned earlier, high-whiteness glass has very high light transmittance, making it particularly popular in optical applications. Whether used to manufacture precision optical components or to display products, it delivers excellent visual performance. 2. Low iron content: High-whiteness glass contains virtually no colored metal oxides, resulting in an almost completely colorless appearance. This feature makes it highly attractive for visual arts and home decoration. 3. Heat resistance: High-whiteness glass exhibits relatively good heat resistance and can maintain its physical properties under high-temperature conditions. This allows it to be used in high-temperature processes such as glass electric melting furnaces.


Troubleshooting Methods for Glass Electric Melting Furnaces

In modern glass manufacturing, electric melting furnaces are becoming increasingly common. Thanks to their high efficiency, environmental friendliness, and cost-effectiveness, many manufacturers are opting for this type of equipment. However, like any mechanical device, these furnaces inevitably encounter malfunctions over prolonged use. So, when issues arise with our electric melting furnace, how can we troubleshoot them effectively? Today, we’ll discuss this topic. I. Understanding Common Types of Faults First, it’s important to recognize that faults in electric melting furnaces can generally be categorized into several types. Examples include inadequate temperature control, uneven melting, and unstable power supply. Think of it this way: just as a high-performance car suffers reduced overall performance if its engine malfunctions, even minor problems with an electric melting furnace can bring an entire production line to a standstill. 1. Temperature Control Failures In an electric melting furnace, temperature is a critical factor. Temperature control failures typically manifest as excessively high or low temperatures inside the furnace; in severe cases, this can lead to uneven glass melting. At such times, we need to check whether the furnace’s temperature sensors are functioning properly or if there are faults in the heating elements. If the temperature sensor is damaged, it could even disrupt the entire production process.


Innovative glass furnace design enhances production efficiency.

In modern industrial production, the design and efficiency of glass furnaces directly impact a company’s production capacity and economic performance. Imagine if a glass furnace were like a highly efficient engine—capable of operating with exceptional precision, saving energy, and improving product quality. Now that would be truly exciting! Today, we’ll explore how innovative glass furnace designs can boost production efficiency. How Glass Furnaces Work A glass furnace heats raw materials until they melt, forming liquid glass. While this process sounds straightforward, it actually involves complex thermodynamics and materials science. A well-designed glass furnace not only ensures uniform heating but also reduces energy consumption—and all of this hinges on the ingenuity of its design. Why Is Innovation Key to Improving Efficiency? Why emphasize innovation? Consider this: operating a glass furnace with outdated technology and designs is akin to driving an old manual‑transmission car on the highway—inefficient and prone to breakdowns. By contrast, an innovative design is like a modern automatic‑transmission vehicle, offering precise control over every detail and delivering significantly higher production efficiency. Key Elements of Innovative Design When optimizing a glass furnace…


The Role of Glass Electrofusion Technology in Different Types of Glass

In today’s glass manufacturing industry, electric melting technology is rapidly gaining prominence, becoming an indispensable component of various types of glass furnaces. You might wonder: “What makes electric melting so special?” In fact, it not only boosts production efficiency but also enhances glass quality—particularly across a wide range of glass applications. Today, we’ll take a closer look at how this technology performs in different kinds of glass. The Basic Principle of Electric Melting First, let’s clarify what electric melting entails. Simply put, it uses electrical energy to heat raw materials until they reach a molten state. Compared with traditional fuel‑based heating, electric melting is both more environmentally friendly and capable of delivering more uniform heating. This means that during glass production, we can better control the melting process, thereby minimizing defects such as bubbles and impurities. Applications of Electric Melting Across Different Glass Types So, how exactly does electric melting contribute to various types of glass? 1. Porcelain Glass For porcelain glass, the introduction of electric melting has significantly improved its purity and transparency. Conventional methods often lead to the formation of bubbles and impurities during melting, whereas electric melting, with its precise control, helps reduce these issues.


Application Prospects of Glass Electrofusion Furnaces in the Production of Electronic Glass

In today’s era of rapid advancements in electronic technology, electronic glass—an essential material—is widely used in devices such as displays and touchscreens. As demand continues to grow, the application of electric melting furnaces in electronic glass manufacturing has become a hot topic. Speaking of electric melting furnaces, one may wonder: what specific advantages do they bring to the production of electronic glass? The Basic Principle of Glass Electric Melting Furnaces Simply put, a glass electric melting furnace uses electrical energy to heat raw materials until they reach a molten state. Compared with traditional combustion‑based furnaces, electric melting furnaces offer higher energy efficiency and significantly lower environmental pollution. This highly efficient heating method not only reduces energy consumption but also minimizes environmental impact. Against the backdrop of growing environmental awareness, the prospects for applying electric melting furnaces are undoubtedly even brighter. Market Demand and Future Prospects With the widespread adoption of smartphones, tablets, and other electronic products, the market demand for electronic glass is steadily increasing. According to market research, over the next few years, demand for electronic glass is expected to grow at an annual rate exceeding 10%. This means that companies producing electronic glass must improve their production efficiency to meet rising market needs. Glass electric melting furnaces are precisely the key to addressing this challenge, enabling rapid heating and stable operation.